2019-2023 Ford Ranger GTR Ultra 3 LED Bulbs: 445% Brighter

Ford Ranger stock halogen headlights before GTR Lighting Ultra 3 upgrade

If you have a 2019-2023 Ford Ranger running those stock H11 halogen lights, it is time to improve them. We just got our hands on an all-new bulb called the GTR Lighting Ultra 3, and in our testing it proved to be the brightest, the best, and the most refined bulb we have put in these headlights. In this article we are going to walk you through exactly how we installed it, and more importantly, show you just how much brighter these Ford Ranger LED headlight bulbs are compared to the stock halogens. The numbers are honestly laughable, in the best possible way.

What Is the GTR Lighting Ultra 3?

The Ultra 3 is the third generation of the popular GTR Lighting LED bulb line, and it provides even more darkness-destroying output than ever before. Unlike its competitors, every aspect of this bulb has been carefully considered, resulting in a design that leaves no detail behind. It is equipped with custom LEDs that are positioned to guarantee efficient light distribution and eliminate wasted light.

GTR Lighting Ultra 3 LED bulb with internal driver and custom LED chips
The GTR Lighting Ultra 3 features custom LEDs, an internal driver, and full potting for waterproofing.

GTR Lighting built this bulb to be durable. It is 100% potted and waterproof, so it is ready to conquer anything the road (or trail) throws at it. It is also super compact thanks to an internal driver, and it pumps out 4,700 lumens of luminosity. Installation is effortless, and the whole thing is backed by a lifetime warranty. It is a bulb that outshines and outlasts the competition. If you want to dig even deeper into the engineering, we put together an in-depth GTR Ultra 3 bulb review that covers the full design story.

A Quick Word on Street Legality

Before we go any further, we have to be straight with you. LED headlight bulbs are not street legal in the USA, and we advise you to not drive with these installed on public roads. In off-road settings these bulbs are perfectly fine to use, but running bulbs this bright on the street may be uncomfortable to other drivers. If you want a legal, DOT-compliant path for your Ranger, swapping the entire headlight assembly is the way to go, and we will touch on that later.

Why Bulb Choice Matters in a Reflector Housing

When looking for an LED bulb to replace the halogen in a Ranger, it is really easy to mess this up because the Ranger uses low beam and high beam reflector-based housings. That essentially means there is just a bunch of mirrors inside. If you do not get a bulb that replicates that wire-wound filament exactly the way the stock halogen illuminates, and the way the GTR Lighting Ultra 3 does, you are going to get a really bad beam pattern.

A bad beam pattern scatters light onto the ground where it blinds you, and above the cutoff line where it blinds oncoming drivers who then blind you right back. That is the last thing anyone wants. The Ultra 3’s custom LEDs and optimized positioning are the reason it plays so nicely with the Ranger’s reflector housings. If you want to compare other styles before you commit, our full lineup of LED headlight bulb options is a good place to start.

Testing: Stock Halogen vs. Ultra 3

To put real numbers behind the hype, we backed the truck up 10 meters and used a digital lux meter to measure the brightest point on the wall. We compared the stock halogen bulbs against the Ultra 3 so you can see exactly how much better this bulb is.

Low Beam Results

This is what your stock low beam halogen bulbs look like on the Ford Ranger. Right away you will notice they are not bright and have a terrible color. We measured only 402 maximum lux at the brightest point on the wall. It is a terrible benchmark, and an easy one to beat.

Lux meter reading of stock Ford Ranger halogen low beam headlight
Stock low beam halogen measured only 402 lux at the brightest point on the wall.

Then we installed the Ultra 3 on low beam, and the result was almost laughable because it was so bright. We measured 2,190 lux. That makes the Ultra 3 low beam 445% brighter than your stock lights. Numbers like that simply did not exist with older generations of bulbs. On top of the raw output, the Ultra 3 produces a much warmer white light than the previous Ultra 2, which is actually more comfortable on long drives. That is exactly why GTR Lighting tuned it that way.

Lux meter reading showing Ultra 3 low beam output of 2190 lux
The Ultra 3 low beam measured 2,190 lux, a 445% increase over stock halogen output.

High Beam Results

Your stock high beam was not actually that bad. The reflector housing did all right and measured 912 maximum lux. The Ultra 3, however, blew that number out of the water, measuring 4,420 maximum lux at the brightest point on the wall. That is 385% brighter than the stock halogen high beam, and the beam is also wider and more intense.

Lux meter reading showing Ultra 3 high beam output of 4420 lux
On high beam, the Ultra 3 reached 4,420 lux, 385% brighter than the stock halogen high beam.

For the Ranger, the low beam uses an H11 Ultra 3 bulb and the high beam uses a 9005 Ultra 3 bulb. If you only want to upgrade your high beams, you can grab the 19-23 Ford Ranger GTR Ultra 3 LED high beam bulbs on their own. You can also pick up the matching 9005/HB3 GTR Ultra 3.0 bulbs at The Retrofit Source if you want the same bulb from another source.

How to Install the Ultra 3 in a Ford Ranger

If all you want to do is upgrade to the best and brightest, this is it. It is pretty amazing to see this much light improvement by simply changing out your halogen bulb. The good news is the install is genuinely easy. Here is exactly how we did it.

Step 1: Remove the Stock Halogen Bulbs

Pop the hood and start on the driver’s side. Locate the back of the headlight housing, reach in, and turn the dust cover counterclockwise to pull it away. Then reach in, turn the halogen bulb counterclockwise, and pull it away. If the lights have been on, that bulb is super hot, so be careful. Unplug the bulb from the OEM connector.

Removing the stock H11 halogen bulb from the Ford Ranger headlight housing
Twist the dust cover counterclockwise and remove the stock H11 halogen bulb to begin the install.

Step 2: Install the Ultra 3 Bulbs

Grab your H11 Ultra 3 bulb for the low beam. For the high beam, do the same thing: reach in, turn counterclockwise, remove the halogen bulb, disconnect it from the OEM wiring, and grab your GTR Lighting Ultra 3 in a 9005. Plug it into your OEM connection, then install the bulb the same way you took the old one out by locking it and turning it clockwise. Do not forget to put your dust covers back on. The last thing you want is dust, water, or moisture inside the housing. Thankfully the Ultra 3 is nice and small, so the dust covers go right back on without any issue. Repeat on the other side.

Step 3: Align the LED Orientation

Do not just set it and forget it. You need to make sure the bulb is aligned properly. You want the LEDs shooting horizontally, not at an angle and not vertical. The cord at the bottom needs to be aimed down. If your bulb is not oriented correctly, there is an included Allen key with the Ultra 3 bulbs. Locate the little keyhole on the collar. You are not removing this screw, so there is no risk of dropping it and losing it. Turn it ever so slightly, then tighten it back down. You may have to try a few times so that when you lock it in place, the LEDs sit perfectly horizontal.

Using the included Allen key to rotate and align the GTR Lighting Ultra 3 bulb collar
An included Allen key lets you rotate the bulb collar so the LEDs sit horizontally for a clean beam pattern.

Step 4: Aim the Headlights

Once your bulbs are clocked and installed, do not forget to level them. Depending on your Ranger, you may need to raise or lower the aim. If it is lifted, you might need to bring them down. If it is lowered, you might need to bring them up. Use the leveling screw at the back side of the headlight housing. It is really easy to turn clockwise or counterclockwise to raise or lower the aim. Take your time here, because proper aim is what keeps all this new light where it belongs.

Fine-tune headlight aim up or down using the leveling screw after installing the Ultra 3 bulbs.

Other Upgrade Options for the Ranger

The Ultra 3 bulb is the only option we would recommend if you want the brightest, best, and most refined upgrade without blinding oncoming drivers. That said, bulbs are not your only path. If you prefer a reflector-specific LED solution, take a look at the 19-23 Ford Ranger CSP Mini LED low beam reflectors.

If you would rather replace the entire headlight assembly for a truly plug-and-play look, that might be a better option for some owners. We really like the Morimoto XB LED headlight assemblies for the 19-23 Ranger as a complete housing upgrade. Whichever direction you go, head to headlightrevolution.com, type in your year, make, and model, and you will see everything we have tested for your truck.

Frequently Asked Questions

How much brighter is the GTR Lighting Ultra 3 than stock Ranger headlights?

On low beam the Ultra 3 measured 2,190 lux versus 402 lux for the stock halogen, a 445% increase. On high beam it measured 4,420 lux versus 912 lux stock, a 385% increase.

What bulb sizes does the Ultra 3 use in a Ford Ranger?

The low beam uses an H11 Ultra 3 bulb and the high beam uses a 9005 Ultra 3 bulb.

Are GTR Lighting Ultra 3 bulbs legal for street use?

No. The transcript states LED headlight bulbs are not street legal in the USA and advises against driving with them on public roads, though they are fine for off-road settings.

How many lumens does the Ultra 3 bulb produce?

It produces 4,700 lumens of output per bulb thanks to its internal driver.

Do the Ultra 3 bulbs need to be aimed or aligned after install?

Yes. Using the included Allen key, rotate the bulb collar so the LEDs sit horizontally with the connector cord facing down, then fine-tune headlight aim using the leveling screw on the back of the housing.


Meet the Experts Behind Headlight Revolution

Chris Nelson, Founder of Headlight Revolution

Chris Nelson – Founder
Before founding Headlight Revolution in 2011, Chris worked as an automotive install technician specializing in lighting, sound systems, and engine performance parts. He has personally tested thousands of lighting products and works directly with lighting engineers to evaluate the technical performance behind every recommendation.

Josh Beberg, Content Production Manager at Headlight Revolution

Josh Beberg – Content Production Manager
Josh leads hands-on testing and content production at Headlight Revolution. From beam pattern comparisons to real-world installations, he works directly with lighting engineers to ensure every review is grounded in measured results, not marketing specs.